Dec 272011
 

These are instructions on how to perform an untethered jailbreak of your iPod Touch 4G on iOS 5.0.1 using RedSn0w for Mac. The Windows version of this tutorial is here.

Step One
Create a folder on your desktop called Pwnage

Download the latest RedSn0w from here and place it in the Pwnage folder. Likewise, download the 5.0.1 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0.1 firmware if you are already on iOS 5.0.1)

Extract the RedSn0w zip file by double clicking it. Continue reading »

Dec 272011
 

These are instructions on how to perform an untethered jailbreak of your iPod Touch 4G on iOS 5.0.1 using RedSn0w for Windows. The Mac version of this tutorial is here.

Step One
Create a folder on your desktop called Pwnage

Download the latest RedSn0w from here and place it in the Pwnage folder. Likewise, download the 5.0.1 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0.1 firmware if you are already on iOS 5.0.1)
Continue reading »

Aug 052011
 

These are instructions on how to jailbreak your iPod touch 4G on the 4.3.5 firmware using RedSn0w for Windows. The Mac version of this tutorial is here. If you are on 4.3.3 or lower make sure you do NOT update to iOS 4.3.5. Use the untethered JailbreakMe instead. You can find the appropriate JailbreakMe tutorial here. (Witch is the same as for iPhone and iPad).
Continue reading »

Apr 162011
 

NOTE: Those of you who rely on a carrier unlock MUST STAY AWAY from Redsn0w and stock iOS 4.3.2 firmware. Also, the patches for 4.3.2 are said to be broken on this version of Redsn0w. PwnageTool 4.3 with 4.3.2 PwnageTool bundles is the recommended.

For tutorial using a windows computer go HERE:

How to jailbreak iOS 4.3.2 using Redsn0w on Windows and Mac:

Download iOS 4.3.1 (required by Redsn0w 0.9.6 for 4.3.2 jailbreak) for your version of iOS device.

Update/Restore to iOS 4.3.2 firmware using the IPSW file you just downloaded via iTunes 10.2.1.

Start Redsn0w and point it to the official iOS 4.3.1 firmware file (NOT iOS 4.3.2 file).

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.3.1 firmware from below and place it in the same folder.

4.3.1 (4 GSM):Download  iPhone3,1_4.3.1_8G4_Restore.ipsw

Extract the RedSn0w zip file by double clicking it.

Step Two
Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down Option and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the 4.3.1 firmware ipsw. Click the Choose button to continue.

Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.

Step Four
Once RedSn0w opens click the Browse button

Step Five
Select the 4.3.1 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.

Step Six
Once the firmware has been verified click the Next button to continue.

Step Seven
RedSn0w will now prepare the jailbreak data

Step Eight
From this window you can select the jailbreak options you would like.

Make sure Cydia is selected and click the Next button to continue

Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button

Step Ten
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Eleven
Your iPhone will now reboot

Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.

Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

REMEMBER THAT AFTER YOU DONE JAILBREAKING IT YOUR IDIVICE WILL NOT BOOT IT WILL STAY ON THE APPLE LOGO, SO HERE IS WAHT YOU DO, FOLLOW ALL THE STEPS AGAIN BUT ON STEP 8 DO NOT SELECT CYDIA AGAIN JUST SELECT  JUSTBOOT TETHERED RIGHT NOW. AND THAT’S IT BUT EVERY TIME YOU TURN YOUR PHONE OR IPOD OFF YOU WILL HAVE TO DO THAT, TILL A UNTETHERED JAILBREAK IS OUT.

Apr 042011
 

The iPhone Dev-Team has released an untethered jailbreak for iOS 4.3.1. The jailbreak implements the untether developed by i0n1c. Continue reading »

Mar 252011
 

Apple has released iOS 4.3.1 for the iPhone, iPad, and iPod touch.
Continue reading »

Dec 302010
 

Continue reading »

Dec 302010
 

All signs have been pointing to this release for a few days now, but we’ll admit: we expected Skype to wait until CES next week to pull the covers off what could become its crown jewel service over the coming months. Skype’s official iOS client has finally sprouted the ability to make video calls, allowing iPhone 3GS, iPhone 4, and fourth-generation iPod touch users to share real-time video amongst each other and users of Skype’s Windows, Mac, and Linux clients along with the ASUS Videophone (obviously, 3GS users won’t have the convenience of a front-facing camera, but they’ll still be able to broadcast video from the rear-facing one). Additionally, you’ll be able to receive video from others if you’re using an iPad or a third-generation iPod touch. The service is free and works over both WiFi and 3G — and considering Skype’s existing PC footprint, we’d argue this stands a very real chance of putting the hurt on FaceTimeusage. No word on when Skype will be making video-capable clients available for Android or other mobile platforms, but Skype says that there’ll be “plenty more” announcements in Vegas next week, so we wouldn’t be surprised.

Continue reading »

Dec 262010
 

As expected, iPhone Dev team has just released a new version of Redsn0w (Redsn0w 0.9.7b1) that implements the “backup plan” for iOS 4.2.1 untethered jailbreak.

Redsn0w 0.9.7b1 can be used to (untethered) jailbreak iPhone 4, iPad and iPod touch 4G on iOS 4.2.1. Please note that Redsn0w 0.9.7b1 is meant only for beta testers and not for the general public as there are still some known issues that need to be addressed. Continue reading »

Oct 162010
 

Geohot has just released limera1n for Mac to jailbreak iPhone 3GS, iPhone 4, iPad, iPod Touch 3G and the new iPod Touch 4G.

This guide will provide you step-by-step instructions to jailbreak iPhone 4 and iPhone 3GS using limera1n.

Here are some important points to note before you proceed.

This guide is only for iPhone 4 and iPhone 3GS users.

Please note that jailbreaking your iPhone may void your warranty and hence proceed with caution.

Do not forget to backup your iPhone before you proceed. You can refer to this post for instructions on how to backup your iPhone.

Limera1n supports iOS 4, iOS 4.0.1, iOS 4.0.2 and iOS 4.1.

Continue reading »