Jailbreak iPad

 

How to Jailbreak iPad 2 and iPad 1 Using JailbreakMe [4.3.3]

____________________________________________________

Jailbreak iOS 3.2.2 on iPad using Limera1n [How to  Guide]

The new all iOS device jailbreak Limera1n is now available for download. It can jailbreak iPhone 3gs , iPod touch 3G, iPad, iPhone 4, iPod touch 4G on iOS 4.0 – 4.1 and beyond. Following instructions will help you jailbreak iPad on iOS 3.2.2.

Step 1: Download Limera1n from here.

Step 2: Connect your iPad via USB to your computer and click on “make it ra1n” as seen in the screenshot below

Limera1n

Step 5: You will see that limera1n puts your iPad in recovery mode. Immediately after this, follow the instructions.

Limera1n

Step 6: Limera1n will be prompt you to press both the home and power buttons.

Limera1n

Step 7: Limera1n will be then prompt you to release the Power button. Continue to press the home button.

Limera1n

Step 8: You will see that limera1n has put your iPad  in DFU mode. Continue to press the home button.

Limera1n

Step 9: While limera1n performs the exploit, you will see the limera1n logo on your iPad . At this point it is fine to release the home button.

Limera1n

Limera1n

Step 10: When limera1n has successfully jailbroken your iPad , you will see “done” and get the following message.

Limera1n

Limera1n

Launch the limera1n app to install Cydia on your iPad. Select Cydia and tap on the Install button to download and install it.

Limera1n

You should find Cydia on your iPad’s homescreen after its rebooted. You can launch the limera1n app to uninstall it as it is no longer required.

_____________________________________________________________________________________________

iPad on iOS 3.2.1 with JailbreakMe 2.0

The userland jailbreak for iPhone 4, iPhone 3GS, 3G on iOS 4 / 4.0.1, iPod touch on iOS 4, and iPad on iOS 3.2.1 is out !!. It is a browser based jailbreak, all you have to do is to browse to http://jailbreakme.com or from your iphone click HERE from your iOS device to jailbreak it. Keep trying until you successfully load the page.

UPDATE 1: Full list of supported devices is as follows:

iPod 1G on 3.1.2
iPod 1G on 3.1.3
iPod 2G on 3.1.2
iPod 2G on 3.1.3
iPod 2G on 4.0
iPod 3G on 3.1.2
iPod 3G on 3.1.3
iPod 3G on 4.0
iPad on 3.2
iPad on 3.2.1
iPhone 3G on 3.1.2
iPhone 3G on 3.1.3
iPhone 3G on 4.0
iPhone 3G on 4.0.1
iPhone 3G[S] on 3.1.2
iPhone 3G[S] on 3.1.3
iPhone 3G[S] on 4.0
iPhone 3G[S] on 4.0.1
iPhone 4 on 4.0
iPhone 4 on 4.0.1

You can follow me on twitter or join our facebook (Search for theiphonenerd)to keep yourself updated on all the latest iPhone jailbreaking and unlocking releases.

_____________________________________________________________________________________________

In this guide you’ll learn how to jailbreak iPad 3.2 with Spirit jailbreak. Spirit is an untethered jailbreak for both iPad 3G and iPad WiFi models plus all iPhones and iPod Touches running firmware 3.1.3 and 3.1.2.

Your iPad 3G or iPad WiFi must be activated in order to jailbreak iPad with Spirit Jailbreak. (Activated means >> Not stuck at emergency or Connect to iTunes screen.) Jailbreaking iPad with spirit jailbreak is very easy, and if I’m not wrong, easier than Blackra1n jailbreak.

Reminder: As reminded over and over again, just make sure to save SHSH blobs for iPad 3.2. SHSH blobs are not required for jailbreaking but to secure future jailbreak. you can save SHSH blobs using Firmware Umbrella and AutoSHSH (Use any of them.)

To  jailbreak iPad OS 3.2 with Spirit Jailbreak, simply follow the step-by-step guide below:

Jailbreak iPad 3.2 with Spirit Jailbreak

***All the downloads are linked at the bottom of this guide.

Step 1

Download Spirit Jailbreak from below (Both Windows and MAC versions are available).

STEP 2

Update your iTunes to latest version (9.1.1). Download link below. (any version from 9 to 9.1.1 should work.)
iPad OS 3.2 is required which is default for now..

STEP 3

Run the downloaded Spirit jailbreak.

spirit jailbreak

ATTENTION Windows 7 users: You need to run the Spirit in compatibility mode for Windows 98. To do this, simply right click on the Spirit.exe file and go to Properties. Then go to Compatibility tab and select Windows 98 from the dropdown of Compatibility Mode. Hit the Apple and then OK button. then run the Spirit.

spirit jailbreak compatibility modespirit jailbreak compatibility mode

STEP 4

Connect your iPad 3G, iPad WiFi to your computer via USB cable and once the iPad is connected to the computer and Spirit detects it,
Hit the Jailbreak button to jailbreak iPad.

jailbreak ipad spirit

jailbreak ipad spirit

STEP 5

Spirit will jailbreak iPad 3G, Jailbreak iPad WiFi running iPad OS  3.2.

When the jailbreak process is complete, Jailbreak Succeeded! message will appear. Hit the Quit button.

jailbreak ipad spirit

Your iPad will reboot and some progress bar will appear. Once the process is complete your iPad will be jailbroken and sweet Cydia icon will be resting on your iPad Home screen.

That’s it.. Have fun with your jailbroken iPad 3.2.

Spirit Download:

Mac OX

Windows

[via iphoneheat]

How to enable Magic mouse on your ipad click HERE: